Igniter™ - Naigon's Electronic Creations

Imperial Royal Arms - the best saberforum in this galaxy!

SaberFont.com - A great source for Igniter fonts!

TCSS - A great resource for all your hardware saber needs.

NECree RGB V2

Ease of Use and Even Brightness Color-Mixing LED

NECree RGB, even brightness of the Cree XP-E2s with simple wiring and built-on diode of the Z6!

Experience the power efficiency of the TriCree XP-E2s with the ease-of-use of the Z6, the NECree RGB is the newest LED from Naigon’s Electronic Creations. Considered to be one of the brightest if not the brightest RGB LED on the market, NEC has merged that power with the features that you have come to love from the Z6: the common-anode (common positive) wiring built in for only 4 required connections, and the built-in resistor so that you do not need an external resistor for the red die!

What’s more is with the center-hole pre-drilled and the optic with mounting points right on the LED, this LED is very install friendly and can be used with just about any optic holder.

New for V2 – The LED is now on a full copper SinkPad II base. This means it can dissipate more heat and thus should last longer and be able to be overdriven a bit harder. All the features you’ve come to love about the NECree just got better. To learn more about the SinkPad base, go to the manufacturer’s site below.

SinkPad's Website

Comes with the Ledil optic (not pictured). This optic has been shown to be brighter overall than the Carclo. See below for details.

Ledil optic

Ledil vs. Carclo Comparison

Cart Summary

Subtotal

Tax

Shipping

Total

Checkout

NECreeRGB

$24.99

Differences

The following table highlights the differences between the Igniter 2™, Spark Color 2™, and Spark 2™ line.

Feature	Spark 3™	Spark Color 3™	Igniter 3™
Audio Quality	10bit On-CPU DAC	10bit On-CPU DAC	16bit External DAC
Clash Detection	Attack	Attack	Attack and Parry
Sound Fonts	3	6	Up to 16
Music	SaberTracks to play up to 99 tracks with blade extension, retraction, and pulse.	SaberTracks to play up to 99 tracks with blade extension, retraction, and pulse, and color change.	SaberCinema to play up to 99 tracks while using the saber with all functionality, just the hum is the track.
Colors	3 Channels for RGB mixing over each of the 3 fonts.	Up to 9 color sets for RGBA mixing.	Up to 16 color profiles, with 32 independent RGBA blade colors.
Color Variation	One blade, blast, and clash/lockup per font for a total of 3	One blade, blast, and clash/lockup per color-set, up to 9	One blade, blast, clash/lockup, and dual phase (secondary blade) color per font, up to 16
Color Switch	Font switch only	Switch font to get to its default color-set; every font can cycle through every color-set	Switch font to get to each font's profile; twist wrist to perform dual-phase color
Color Variation	NA	NA	ClashShade™, BlastShade™, and BladeShade™
Cross Guard Built-in	Single-color quillions with effects on blade only	Single-color quillions with effects on blade only	Single-color quillions with effects on blade only
Cross Guard w/ XDrive	NA	RGB mixing on blade and quillions	RGB mixing on blade and quillions
Saber Apps	NA	Configuration only	Up to 16 apps
Accent LEDs	3	3	8
Extra Sounds	NA	Single 'dual.wav' on the root	99 dualA, dualB, and fx sounds per font

Commonalities

The following properties are shared across all my sound boards.

Hardware specs: 16bit DAC, 2.4W @ 8ohm Audio amp, 4A MOSFET for driving 4 independent die, inputs for two momentary switches (main and aux), 8 outputs for driving small 2-3v accent LEDs, fully integrated 6-axis swing detection for motion and impact detection.
Board size: 2.07” x 0.85” x 0.26” with driver; 1.75” x 0.85” x 0.26” driver removed.
MotionSense V2 motion detection engine from Igniter 3™.
Supports TruMix™ with Auto-Compressing Technology™ which supports crystal clear mixing of sounds without the need to pre-mix them. This allows for any hum to be used with any other effect sound, allowing endless possibilities for sound font creation.